BCKZG - A & B EPOXY PUTTY & RIBBON, PT A
- MSDS: BCKZG
- Manufacturer: APPLIED PLASTICS COMPANY
- Product Name: A & B EPOXY PUTTY & RIBBON, PT A
- National Stock Number: 8010-00N003852
Product Identification
Product ID:A & B EPOXY PUTTY & RIBBON, PT A
MSDS Date:01/01/1985
FSC:8010
NIIN:00N003852
MSDS Number: BCKZG
Responsible Party
Emergency Phone: 213-322-8050
Cage: 05866
Contractor
Cage: 05866
Ingredients
BISPHENOL A EPOXY RESIN
Fraction By Weight: 20%
CALCIUM CARBONATE (MARBLE) (LIMESTONE)
CAS: 1317-65-3
RTECS: EV9580000
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST; 9192
TALC (CONTAINING NO ASBESTOS)
CAS: 14807-96-6
RTECS: WW2710000
OSHA PEL 2 MG/M3 RDUST
ACGIH TLV: 2 MG/M3 RDUST; 9192
Hazards
Effects of Overexposure:EYE:IRRIT/BURNS.SKIN:IRRIT.ACUTE OVEREXPOS:POSS
SEVERE IRRIT.CHRONIC OVEREXPOS:POSS SENSITIZATION.
First Aid
First Aid:EYES:FLUSH IMMED W/COPIOUS AMOUNTS OF WATER 15 MINS, CALL MD.
SKIN:WASH W/SOAP & WATER OR WATERLESS HAND CLEANERS. INH:MOVE TO
FRESH AIR. ING:SEEK MD IF UNUSUAL SYMPTOMS DEVELOP.
Fire Fighting
Flash Point:470F,243C TCC
Extinguishing Media:WATER SPRAY,FOAM,CO*2,DRY CHEMICAL
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE
Accidental Release
Spill Release Procedures:USE APPROPRIATE SAFETY EQUIPMENT. SCRAPE UP
EXCESS, ABSORBENTS MAY BE USED. WASH DOWN W/ACETONE, IPA OR
CHLORINATED SOLVENT TAKING CARE TO OBSERVE FIRE & TOXIC HAZARDS OF
SOLVENTS USED.
Handling
Handling and Storage Precautions:FOR INDUSTRIAL USE ONLY. AVOID GROSS
CONTAMINATION OF SKIN & EYE CONTACT. STORE IN COOL AREA IN CLOSED
CONTAINERS. SPI CLASSIFICATION:1.
Exposure Controls
Respiratory Protection:NOT REQD, MFR.
Ventilation:NOT REQD EXCEPT FOR COMFORT, MFR.
Protective Gloves:SEE OTH PROT EQ
Eye Protection:IF NEEDED TO PRVNT CNTACT
Other Protective Equipment:GLOVES NOT REQD IF AREAS OF CNTCT ARE WASHED
REASONABLY SOON
Supplemental Safety and Health
Chemical Properties
HCC:T6
Spec Gravity:1.95
Solubility in Water:INSOLUBLE
Appearance and Odor:VERY LIGHT GREY COLORED PUTTY; MILD EPOXY ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
NONE
Hazardous Decomposition Products:NONE
Disposal
Waste Disposal Methods:USE STANDARD INDUSTRIAL WASTE DISPOSAL IN
ACCORDANCE W/LOCAL,STATE & FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.